Description of HDPE Siphon Fittings
CHUANGRONG HDPE siphon pipes provide a one-stop solution for
drainage.
Contains HDPE siphon pipes, fittings, and metal fittings for fixing
HDPE piping systems.
Siphon pipes and fittings are made of high-density polyethylene, it
has significant advantages over
traditional drainage systems. CHUANGRONG HDPE siphon pipe system
has excellent mechanical
properties, physical properties and chemical properties. High
impact and abrasion resistance
Resistors are very flexible and offer multiple connection options.
These comprehensive characteristics make it very suitable as a
drainage material,
It satisfies the needs of building drainage well, and the stable
quality ensures the safety of drainage
solutions.
Main Advantages to Choose CHUANGRONG Siphon HDPE Pipe System
1.Smooth inner wall, and does not change with time, small
frictional resistance,save energy, the pres
-sure loss about 30% smaller than the steel tube,can choose smaller
than steel pipe diameter. Health
performance is good, no additives, no possibility of pollution of
drinking water, ISO standard grading
polyethylene material level 0 (the lowest), no mildew material,
compared with some other commonly
used plastic material of polyethylene is much mildew resistance,
use for a long time also not fouling.
2. PE pipe installation available welding or fused to form a
completely closed seepage control system.
3. Has good flexibility, small can winding pipe, pipe winding along
the ditch, can resist formation geolo
-gical change, can be used as liner repairing old pipeline.
4.Heat expansion:The thermal expansion of HDPE also needs to be
considered in the design and ins
-tallation. As a rule Thumb, for every 50 ° C increase in
temperature, 15 mm expansion per meter of pipe
Can be expected.
5.Resistance to hot water: CHUANGRONG HDPE allows temperatures up
to 100 ° C for short periods
of time (such as steam surges), and can be safely used as
wastewater pipes without mechanical load
up to 80 ° C
6.Tightness:After proper installation,The joints will remain
watertight for the life of the building. Because
years of experience in welding HDPE pipes have shown that butt and
electric fusion. The weld forms a
stronger watertight joint than the pipe.
7.Protection against blockages:Solid deposits and low flow of water
cause low surface tension and hydr
-ophobicity of HDPE to prevent Clogged.
8.Welding temperature:The welding temperature of HDPE is about 230
° C, which makes welding easier
and more reliable than other connection methods. Compared to many
other materials, HDPE requires low
energy input to produce.
