Description of HDPE Siphon Fittings
CHUANGRONG HDPE siphon pipes provide a one-stop solution for
drainage.
System components of siphon HDPE pipeline, The complete proven and
practical product range
consists of:
• Pipes
• Fittings
• Connections
• Fastenings
Siphon pipes and fittings are made of high-density polyethylene, it
has significant advantages over
traditional drainage systems. CHUANGRONG HDPE siphon pipe system
has excellent mechanical
properties, physical properties and chemical properties. High
impact and abrasion resistance.
Resistors are very flexible and offer multiple connection options.
These comprehensive characteristics make it very suitable as a
drainage material,
It satisfies the needs of building drainage well, and the stable
quality ensures the safety of drainage
solutions.
Main Reasons to Choose CHUANGRONG Siphon HDPE Pipe System's
Solution
1.Smooth inner wall, and does not change with time, small
frictional resistance,save energy, the pres
-sure loss about 30% smaller than the steel tube,can choose smaller
than steel pipe diameter. Health
performance is good, no additives, no possibility of pollution of
drinking water, ISO standard grading
polyethylene material level 0 (the lowest), no mildew material,
compared with some other commonly
used plastic material of polyethylene is much mildew resistance,
use for a long time also not fouling.
2.Polyethylene pipe can be welded joint with pipe become an organic
whole, without the possibility
of joint leakage, water saving, reducing operation cost and
maintenance cost examination, pipe can
be manufactured in any length, but the flexible layout, saving
fittings.
3.Heat expansion:The thermal expansion of HDPE also needs to be
considered in the design and
installation. As a rule Thumb, for every 50 ° C increase in
temperature, 15 mm expansion per met
-er of pipe can be expected.
4.Resistance to hot water
Geberit HDPE allows temperatures up to 100 ° C for short periods of
time (such as steam surges),
and can be safely used as wastewater pipes without mechanical load
up to 80 ° C.
5.Resistance to impact
CHUANGRONG HDPE is also very suitable for installation in
The parking lot and pedestrian zone are indestructible at room
temperature. Its impact resistance
is very high. Even at extremely low temperatures (down to about -40
° C).
6.Noise:HDPE limits solid conduction, However, airborne noise
should be isolated. HDPE is a soft
material with low Young's modulus. This can be done through pipes
or lagging.
7.Chemical resistance:CHUANGRONG HDPE has high chemical resistance:
HDPE is only soluble
in aliphatic and aromatic carbon and its chlorinated products
exceeding 90 ° C, and insoluble in all
solutions at 20 ° C. The material will be exposed to severely
oxidized media (concentration HN03,
concentrated H2 S04) for a long time at room temperature.
8.Tightness:After proper installation,The joints will remain
watertight for the life of the building.
Because years of experience in welding. HDPE pipes have shown that
butt and electric fusion.The
weld forms a stronger watertight joint than the pipe.
9.PE pipe installation available welding or fused to form a
completely closed seepage control system.
10.Light, easy to install, handling, connection, construction is
convenient and reliable.
